Some people see the task of setting up a wireless network within their home as a hard task, but it must be really not. In today's generation, we are surrounded by many wireless options. This is fine as long as we protect ourselves and make us, how it works.
First you must decide how you want your network setup and what you need in order to achieve this. In most cases, a house a desktop computer and who then becomes aor more other computers elsewhere within the house. These other computers may be other desktops or mobile laptops that does not really matter, except that you need to find the appropriate wireless adapter for those computers. Can use a desktop will need either a wireless PCI adapter or USB adapter in a laptop is a PCMCIA adapter card or USB adapter. Most new notebooks come with wireless already incorporated into the system, so you can make sure that before you buyan adapter. Then you must also get a wireless router. It is advantageous if you buy the router and the adapter from the same manufacturer, but it is not a necessity. As long as they both have the same technology that they should work together. 802.11g is the most commonly used signal. The wireless router acts as a base station that wirelessly transmits your internet signal. Your wireless adapter to connect your computer to the router withthis signal.
First, you should consult your broadband modem. This can be DSL, cable or FIOS. Also, your router should be unplugged. Now connect a network cable from the modem to the Internet, WAN, or WLAN port on the back of the router. Connect the modem and turn it on. Wait a few minutes to make sure that it is connected to the Internet. Then plug in and turn on the router. The LEDs on the front of the router should occur after about one minuteindicates that the modem is connected. Now turn off the computer when it is not already enabled. Most people will be the main computer directly into the router, plug and make the other wireless so that the removal of an unused wireless adapter.
So, now is a network cable connector from one of the LAN ports on the router directly to the LAN port on the motherboard of the computer. Windows XP will detect an internet connection and to enter a pop-up message with this indication.Next, you must open your Internet browser (Internet Explorer or Firefox) and enter the address that came with your router documentation. You can ask for the default password. The page displays the router's configuration. From here you can mentioned in the same wireless network name will enter the SSID. Make sure that this name is unique for your own protection. Also set the WPA or WEP, which was also a unique type of word.
This is a passwordProtection that you do not remember him. Then, finally, an administrator password. Make sure that you have forgotten this password, because you need it if you ever want to change something. Now that the router's setup, we take you to the adapter. Plug the adapter according to your computer or other computer and Windows will recognize it and show that device has a wireless connection. Note that a desktop be turned off when installing a PCI adapter. Atthis time, Windows may prompt you for a software that came with the adapter to install. Once this was done, right-click Wireless Network icon in the lower right corner of your Windows screen. He will say: View Available Wireless Networks. Locate your wireless network and click Connect to connect. Your wireless network should now be set up like that.
ACER NOTEBOOK The Smartphone Source for Smart Phones Software
No comments:
Post a Comment